Best OBD 3 Scanners (2022)- Top Picks

Are you an automobile freak who always searches for new innovations and advancements in the car industry?

If so, then you must be looking for the best obd 3 scanners feature and expected price.

In 1996, the government of the USA enforced the OBD2 system and it became mandatory for all car manufacturers to implement OBD II technology in all upcoming cars.

As per the Society of Automotive Engineers (SAE) recommendations, OBD2 has standardized connectors and diagnostic trouble codes.

Due to this mechanics can use any OBD2 scanner to diagnose trouble codes and find the problems in vehicles.

What is OBD3?

Best OBD 3 scanner

The last modifications were done in 2008 in which an OBD-II with Controller Area Network as specified by ISO 15765-4 became mandatory for all vehicles sold in the USA.

Since then, everybody is curious to know about OBD3. If you’re also looking to learn more about it, you should read it below.

OBD3 is the new technology in automotive industries that overcome the shortcomings of the OBD2 system.

Although, there is no official announcement yet; many experts and sources predicted the new features of the OBD3 system.

What are the Features of OBD3?

Automotive Service Association (ASA) and Environmental Protection Agency (EPA) are collectively working on the concept of On-board Diagnostic 3rd generation.

OBD III is being discussed as a program to minimize the delay between the detection of an emissions malfunction by the OBD II system and the actual repair of the vehicle.

In OBD3, it is expected that the system automatically detects the emission of the vehicle and reports to the regulatory.

Then vehicle owner is further directed by the regulator to get it tested and repaired.

Experts predicted that the monitoring technology detects a fault, a law enforcement officer stops the vehicle with the fault code, and a technician working with the officer at the scene verifies that a code is set.

When is OBD3 Release?

There is no official announcement of the OBD3 release date but experts believe that OBD3 will come by 2025.

If you want further information about the release date, wait for the official announcement.

Best OBD 3 Scanners: Features & Expected Pricing

Are you looking for the best obd 3 scanners? Before buying one, you should know- what type of obd is my car?

OBD 3 is not released yet and almost all the cars made after 1996 are running on the OBD2 system.

So, instead of searching for OBD 3 scan tool, you should look for an OBD2 scanner.

Here are the top-rated OBD2 scanners for reading fault codes-

  1. FIXD OBD2 Scanner
  2. Autel MaxiCOM MK808 Scanner
  3. BlueDriver Pro OBDII Scan Tool
  4. LAUNCH CRP129X OBD2 Scan Tool
  5. Autel MaxiDiag MD806 Pro OBD Scanner
  6. Autel AutoLink AL319 OBD2 Scanner
  7. OBDLink MX+ OBD2 Scanner
  8. ANCEL AD410 OBD2 Scanner
  9. FOXWELL NT201 OBD2 Scanner
  10. INNOVA 6030P OBD2 Scan Tool

These are the top 10 OBD scanners for detecting trouble codes and clearing fault codes on your vehicle.

FIXD OBD2 Scanner Review

FIXD Bluetooth OBD2 Scanner

FIXD is a handy and easy-to-use OBD2 scan tool that supports all recent car models. It’s a very lightweight product that can be left plugged in the car because it doesn’t drain the battery.

It can detect 7000+ potential issues in your car and find out why MIL or Check Engine light is ON.

It comes with a smart mobile app that is compatible with both Android and iOS platforms.

Using the FIXD OBD scan tool is very easy because of the clean UI and detailed information shown on the screen.

Also, the UI is highly customizable and you can add Engine RPM, Tyre Pressure, Fuel Economy, etc. on the dashboard.

If you want the best Bluetooth OBD2 scanner then FIXD is the right choice. It’s a cheap and portable device to read engine faults quickly.

Conclusion

If you need the best obd 3 scanners to know why the Check Engine light is glowing, you should go for the FIXD OBD2 scanner because OBD3 is not released yet. All the latest cars running on the OBD2 system.

Hi, I'm Richard, an ASE-certified mechanic in Florida, USA. I love to optimize car ECU for better fuel economy and troubleshoot engine code errors and fix them.

Leave a Comment